Installing and Running OLI Engine for UniSim Design (Trial Copy)

From wiki.olisystems.com
Revision as of 18:19, 23 January 2020 by Jberthold (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Contents

Trial Copy

The trial version of the OLI Engine for Unisim Design became available with version 10 of the OLI software. The trial version will not work on earlier versions so please do not download or install versions 9.6.3 or earlier!

Why download the OLI Engine in UniSim Design?

A common question arises from UniSim Design users is "Why do I have to download software from OLI Systems, Inc. if it is already available to me from the UniSim Design installation package?"

This is a good question. The answer is easy to understand. OLI continually updates both its databases with new data and updated data as well as continually updates the numerical engine. The version of the OLI Engine in UniSim Design you received from original installation package could be superseded by a more recent build from OLI. For example, version 9.2.1 of the OLI Engine for UniSim design available for UniSim Design R440. This was the version OLI shipped to Honeywell when UniSim Design R440 was being created for release. More recently OLI released version 10.0.1.21 which contained updated and new data sets not available in the original 9.2.1. If you needed this new data you would have to download the updated software directly from OLI Systems.

Downloading the OLI Engine in UniSim Design

Go to our Downloads page at downloads.olisystems.com

Use your trial serial number provided to you by OLI Systems Inc and find OLI Engine listed. Enter your personal information since the image shows only an example.

2020-01-23 12-40-19.png

Click the GO button

2020-01-23 12-42-48.png

Click the download button. This will prompt you to save the file. There are older versions of the OLI Engine for Unisim Design in the Archived section (currently in a collapsed view). These archived versions will not work with the trial copy, please do not download or install these archived products.

Installing the OLI Engine

After the download run the installation file from the location where you saved the file.

2020-01-23 12-47-04.png

Click the next button.

2020-01-23 12-49-06.png

You should really scroll down and read the license agreement. Click the "Accept" radio button then click Next

Select the I accept the terms radio button and click Next:

2020-01-23 12-51-06.png

Enter your personal information if you want. OLI does not require your name or company information. However, please enter the trial serial number provided to you by OLI. In this above image we have blanked most of the serial number, please enter the full serial number.

Click Next when complete.

2020-01-23 12-53-40.png

OLI recommends you select the Typical Installation button. You will automatically placed on the next screen.

2020-01-23 12-55-31.png

It will take a few moments to install the software. You might be requested to "Elevate" the process. Please accept the elevation prompt.

After a few minutes the installation will complete

2020-01-23 13-14-53.png


OLI Engine for UniSim Design

The OLI Engine should automatically link to the Unisim Design program. In some cases it does not. Please follow this guide to properly link the OLI Engine with Unisim Design.

Using the Config Tool for the OLI Engine in UniSim Design

OLI interface inside of UniSim

Create a new case, in the Basis Environment click Add on the Fluid Pkgs tab


Click Add


Unisim 24.jpg


Scroll down to find OLI Electrolyte package;


Unisim 26.jpg


Add OLI and click component list view:


Unisim 25.jpg


Find the OLI Library Component and select between AQ or MSE framework and add your selected components.


Unisim 27.jpg


Now you know that OLI is working within UniSim.

Please contact OLI oli.support@olisystems.com if you had any further questions.