Installing and licensing OLI Engine in UniSim Design R440

From wiki.olisystems.com
Revision as of 18:18, 12 May 2015 by RNIMKAR (Talk | contribs)

Jump to: navigation, search

A UniSim Design OLI client, can have different kinds of keys.

Please identify with the help of your vendor what kind of key you have out of the following:


  • LA key ( Network USB hardware key)
  • LS key ( Network softkey)
  • PA key ( Individual USB hardware key)
  • PS key ( Individual softkey)

USB hardware keys look like the following image:

LA key.jpg


LA and LS means that you have a network copy.

Installation procedure for a Network copy consists of two steps. First is to install a Network License Manager. The Second is Installing the OLI Engine for UniSim.

If you have an LA key , please follow the links below:

Step 1: Installing and Running the OLI License manager 3.1- USB Hardware Key edition

Step 2: Installing and Running OLI Engine in UniSim Design On Network


For a LS key, you need the Network License Manager , Again you have a two step process:

Step 1: Installing and Running the OLI License Manager 3.1 - Softkey Edition

Step 2: Installing and Running OLI Engine in UniSim Design On Network


If you have a PA key, you have a one step process:

Installing and running the OLI Engine in UniSim Design (for individual USB hardlock key)

For a PS key, follow the link below for install:

Installing and Running OLI Engine for UniSim Design (for individual softkey)