View source for OLI Flowsheet Applications

On this page we have collected some sample applications using OLI Flowsheet

;[[Autoclave Simulation for Hydro-metallurgy]]
:This is a simulation where a metal oxide (ZnO) is reacted with hydrochloric acid (HCl) in an ethanol solution. This example points out how to set up the initial charge and how to obtain results.

;OLI Flowsheet User Guide Example cases
:A collection of cases used to develop the user guide. Click the link to download the example


{| class="wikitable"
! style="font-weight: bold;" | OLI Flowsheet File
! style="font-weight: bold;" | Comments
! style="font-weight: bold;" | Version
|-
| Ammonia Scrubber without reaction kinetics
| A column without reaction kinetics to give the user a basic case with which to work.
| [http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/Ammonia%20Scrubber%20without%20kinetics.esp 9.5.3(ESP)], [http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/(10.0.2.1)%20Ammonia%20Scrubber%20without%20kinetics.esp 10.0.2.1(ESP)],
[http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/(10.0.2.1)%20Ammonia%20Scrubber%20without%20kinetics.csv 10.0.2.1(CSV-Streams)]
|-
| [http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/Ammonia%20Scrubber%20with%20kinetics.esp Ammonia Scrubber with reaction kinetics]
| A column with reaction kinetics, using standard kinetics.
| 9.5.3
|-
| [http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/Emergency%20Chlorine%20Scrubber%2010%20percent.esp Emergency Chlorine Scrubber with 10 wt% NaOH]
| The emergency chlorine scrubber with 10% NaOH scrubbing liquor. Scaling Tendencies are low in this case
| 9.5.3
|-
| [http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/Emergency%20Chlorine%20Scrubber%2030%20percent.esp Emergency Chlorine Scrubber with 30 wt% NaOH]
| The emergency chlorine scrubber with 30% NaOH scrubbing liquor. Scaling Tendencies are high in this case
| 9.5.3
|-
| [http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/HF%20Titration%20Sensitivity%20Analysis.esp HF Sensitivity Analysis]
| A tutorial on how to set up and use a sensitivity analysis
| 9.5.3
|-
| [http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/Reactor-Gibbs.esp Reactor - Gibbs type reactor]
| A example of using the Gibbs reactor
| 9.6.2
|-
| [http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/Reactor-Spec-Test.esp Reactor - User defined reaction kinetics (Spec type)]
| Reaction Kinetics using user defined (non-Arrehnius) type kinetics
| 9.5.3
|-
| [http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/Reactor-Std.esp Reactor - Using standard Arrehnius type reaction kinetics]
| Reaction Kinetics using Arrehnius type kinetics
| 9.5.3
|-
| [http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/Reactor-Stoich.esp Reactor - Stoichiometric]
| A stoichiometric reactor, also known as a CONV type reactor
| 9.5.3
|-
| [http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/Sour%20Gas%20Sweetening.esp Sour Gas Sweetening]
| A flowsheet simulating sour-gas sweetening
| 9.5.3
|-
| [http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/RO%20Desalination%20Test%20Case.esp RO Membrane]
| Example of an RO membrane
| 9.6.1
|}


[[Category: Applications]][[Category: OLI Flowsheet]]