Difference between revisions of "OLI Flowsheet Applications"

From wiki.olisystems.com
Jump to: navigation, search
Line 31: Line 31:
 
| [http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/(10.0.2.1)%20Emergency%20Chlorine%20Scrubber%2010%20percent.csv 10.0.2.1]
 
| [http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/(10.0.2.1)%20Emergency%20Chlorine%20Scrubber%2010%20percent.csv 10.0.2.1]
 
|-
 
|-
| [http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/Emergency%20Chlorine%20Scrubber%2030%20percent.esp Emergency Chlorine Scrubber with 30 wt% NaOH]
+
| Emergency Chlorine Scrubber with 30 wt% NaOH
| The emergency chlorine scrubber with 30% NaOH scrubbing liquor. Scaling Tendencies are high in this case
+
| A column using 30 % by weight NaOH to scrub a gas stream containing chlorine, carbon dioxide and nitrogen
| 9.5.3
+
| [http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/(10.0.2.1)%20Emergency%20Chlorine%20Scrubber%2030%20percent.esp 9.5.3], <br>
 +
[http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/(10.0.2.1)%20Emergency%20Chlorine%20Scrubber%2030%20percent.csv 10.0.2.1]
 +
| [http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/Emergency%20Chlorine%20Scrubber%2030%20percent.esp 10.0.2.1]
 
|-
 
|-
 
| [http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/HF%20Titration%20Sensitivity%20Analysis.esp HF Sensitivity Analysis]
 
| [http://support.olisystems.com/Documents/ExampleFiles/OLI%20Flowsheet/HF%20Titration%20Sensitivity%20Analysis.esp HF Sensitivity Analysis]

Revision as of 15:44, 14 January 2021

On this page we have collected some sample applications using OLI Flowsheet

Autoclave Simulation for Hydro-metallurgy
This is a simulation where a metal oxide (ZnO) is reacted with hydrochloric acid (HCl) in an ethanol solution. This example points out how to set up the initial charge and how to obtain results.
OLI Flowsheet User Guide Example cases
A collection of cases used to develop the user guide. Right-click and save the case.


OLI Flowsheet File Comments Version Validation (Stream Reports)
Ammonia Scrubber without reaction kinetics A column without reaction kinetics to give the user a basic case with which to work. 9.5.3,
10.0.2.1,
10.0.2.1
Ammonia Scrubber with reaction kinetics A column without with reaction kinetics parameters which can be adjusted. 9.5.3,

10.0.2.1

10.0.2.1
Emergency Chlorine Scrubber with 10 wt% NaOH A column using 10 % by weight NaOH to scrub a gas stream containing chlorine, carbon dioxide and nitrogen 9.5.3,

10.0.2.1

10.0.2.1
Emergency Chlorine Scrubber with 30 wt% NaOH A column using 30 % by weight NaOH to scrub a gas stream containing chlorine, carbon dioxide and nitrogen 9.5.3,

10.0.2.1

10.0.2.1
HF Sensitivity Analysis A tutorial on how to set up and use a sensitivity analysis 9.5.3
Reactor - Gibbs type reactor A example of using the Gibbs reactor 9.6.2
Reactor - User defined reaction kinetics (Spec type) Reaction Kinetics using user defined (non-Arrehnius) type kinetics 9.5.3
Reactor - Using standard Arrehnius type reaction kinetics Reaction Kinetics using Arrehnius type kinetics 9.5.3
Reactor - Stoichiometric A stoichiometric reactor, also known as a CONV type reactor 9.5.3
Sour Gas Sweetening A flowsheet simulating sour-gas sweetening 9.5.3
RO Membrane Example of an RO membrane 9.6.1