Unable to continue executing the code because the system did not detect OLIControls11.dll. To fix this problem, try reinstalling the program

From wiki.olisystems.com
Jump to: navigation, search

Error during installation: Unable to continue executing the code because the system did not detect OLIControls11.dll. To fix this problem, try reinstalling the program

OLI originally interfaced with KBC's Petrosim version 7.1. This required OLI's standalone Chemistry Wizard. With Petrozim version 7.2 the OLI Chemistry Wizard functionality is built into Petrosim and thus the chemistry wizard is no longer needed. However, a common control DLL "OLIControlls11.dll" is linked to the old Chemistry Wizard. For this version of Petrosim the OLI Chemistry Wizard needs to be manually installed via the OLI Engine for Petrosim installation package.

Here is how to force the manual installation of the OLI Chemistry Wizard via the OLI Engine for Petrosim installation package:

Start the installation package and enter in the appropriate serial number

When you get to this dialog:

2021-09-20 11-17-57.png

Select the Custom Installation option.

Enable the Chemistry Wizard option

2021-09-20 11-19-46.png


Click the down-arrow and select "Entire feature will be installed on local hard drive"


2021-09-20 11-21-41.png

You may now finish the installation.

This will resolve the error message. OLI Systems, Inc. will fix this installation issue on our next release which will be 11.5.