Difference between revisions of "Diffusivity not available"
(Created page with " Please note that the units for conditions used here could be different from the ones on the data you have. Another important factor to make a note of it unit conversions. If...") |
|||
(2 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | + | ||
− | If you see an error like the following, | + | If you see an error like the following, there could be more than one reasons for it. The probable reasons are listed after the image. |
[[File:Error message.png|500px]] | [[File:Error message.png|500px]] | ||
+ | |||
+ | |||
+ | * Pressure lower than dew point pressure | ||
+ | * Temperature too high causing vaporization of the system | ||
+ | * Not enough liquid phase present | ||
+ | * Too much gaseous inflow resulting into stripping of the liquid phase | ||
+ | |||
+ | |||
+ | |||
+ | [[Category:Error messages]] |
Latest revision as of 14:29, 8 October 2014
If you see an error like the following, there could be more than one reasons for it. The probable reasons are listed after the image.
- Pressure lower than dew point pressure
- Temperature too high causing vaporization of the system
- Not enough liquid phase present
- Too much gaseous inflow resulting into stripping of the liquid phase