Difference between revisions of "What Unit Operations are supported in the Aspen PLUS OLI interface?"
(Created page with "There are many unit operations that are supported in the Aspen PLUS OLI interface. As time progresses this list will expand. The short answer is if you can select the OLI Prop...") |
(No difference)
|
Latest revision as of 10:47, 1 October 2014
There are many unit operations that are supported in the Aspen PLUS OLI interface. As time progresses this list will expand. The short answer is if you can select the OLI Property Set in the unit, then it is supported. Here is a partial list of supported unit operations.
Mixers FSPLIT SEP SEP2 Heater FLASH2 FLASH3 HEATX MHEAT RADFRAC (see note) RSTOIC RYIELD RCSTR RPLUG PUMP COMPR
Note: RADFRAC (and older RATESEP) blocks do not actually use the full OLI thermodynamic package. Most unit operations make the call to the OLI interface for both thermodynamic properties and to converge the equation set. RADFRAC will only use OLI's thermodynamics for the properties. The column calculations in RADFRAC are still calculated by Aspen PLUS.