Installing the local (client) copy of a networked OLI Software

From wiki.olisystems.com
Revision as of 11:21, 14 December 2015 by Jberthold (talk | contribs) (Created page with "This page discusses the installation of the local (client) side of a copy of the OLI Software. All the software packages use the same installation path. == What you need ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This page discusses the installation of the local (client) side of a copy of the OLI Software. All the software packages use the same installation path.


What you need to know before you start

Since this is a network copy you must have the following information available to use the OLI software.

  • Server Name or IP address
  • Firewall port if required

We will be using the OLI Studio program as an example of the installation but all the OLI software use the same paths.


Installing a new copy of the OLI Software

In this tutorial we are installing the network copy (client) that did not have a previous version of this OLI software installed. We are installing OLI Studio 9.2.7

Retrieved from "https://wiki.olisystems.com/wiki/index.php?title=Installing_the_local_(client)_copy_of_a_networked_OLI_Software&oldid=2848"