What Unit Operations are supported in the Aspen PLUS OLI interface?

From wiki.olisystems.com
Revision as of 10:47, 1 October 2014 by RNIMKAR (talk | contribs) (Created page with "There are many unit operations that are supported in the Aspen PLUS OLI interface. As time progresses this list will expand. The short answer is if you can select the OLI Prop...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

There are many unit operations that are supported in the Aspen PLUS OLI interface. As time progresses this list will expand. The short answer is if you can select the OLI Property Set in the unit, then it is supported. Here is a partial list of supported unit operations. 

   Mixers
   FSPLIT
   SEP
   SEP2
   Heater
   FLASH2
   FLASH3
   HEATX
   MHEAT
   RADFRAC (see note)
   RSTOIC
   RYIELD
   RCSTR
   RPLUG
   PUMP
   COMPR

Note: RADFRAC (and older RATESEP) blocks do not actually use the full OLI thermodynamic package. Most unit operations make the call to the OLI interface for both thermodynamic properties and to converge the equation set. RADFRAC will only use OLI's thermodynamics for the properties. The column calculations in RADFRAC are still calculated by Aspen PLUS.

Retrieved from "https://wiki.olisystems.com/wiki/index.php?title=What_Unit_Operations_are_supported_in_the_Aspen_PLUS_OLI_interface%3F&oldid=953"