List of Alloys for Corrosion Rates

From wiki.olisystems.com
Revision as of 20:08, 1 December 2015 by Jberthold (Talk | contribs)

Jump to: navigation, search

Here is a list of alloys that are currently available for corrosion rate calculations. Also listed is whether or not the alloy is suitable for the thermal aging calculations.
All compositions are in weight percent.

Alloy Name Fe Ni Cr Mo C N Thermal Aging
13 %Cr stainless steel 86.85 0 13 0 0.15 0 Yes
Alloy 2205 68.612 5.5 22.5 3.2 0.018 0.17 Yes
Alloy 254SMO 55.68 18 20 6.1 0.02 0.2 Yes
Alloy 600 8.534 75.032 16.408 0 0.026 0 Yes
Alloy 625 N/A N/A N/A N/A N/A N/A Special
Alloy 690 9.35 62.056 28.57 0 0.024 0 Yes
Alloy 825 30.41 44.28 22.09 3.21 0.01 0 Yes
Alloy C-22 3.8 58.196 21.4 16.6 0.004 0 Yes
Alloy C-276 5.544 60.372 16.133 17.948 0.003 0 Yes
Aluminum 1100 N/A N/A N/A N/A N/A N/A No
Aluminum 1199 (Pure) N/A N/A N/A N/A N/A N/A No
Carbon steel 1018 N/A N/A N/A N/A N/A N/A No
Carbon steel A212B N/A N/A N/A N/A N/A N/A No
Carbon steel A216 N/A N/A N/A N/A N/A N/A No
Carbon steel G10100 (generic) N/A N/A N/A N/A N/A N/A No
Cu N/A N/A N/A N/A N/A N/A No
CuNi 7030 N/A N/A N/A N/A N/A N/A No
CuNi 9010 N/A N/A N/A N/A N/A N/A No
Fe (Pure) N/A N/A N/A N/A N/A N/A No
Fe (Zone Refined) N/A N/A N/A N/A N/A N/A No
Ni N/A N/A N/A N/A N/A N/A No
Stainless Steel 304 71.93 9 19 0 0.07 0 Yes
Stainless Steel 316 69.466 10.91 17.4 2.17 0.054 0 Yes

Notes: N/A = the composition for this alloy does not enter into the corrosion rate calculations in the OLI software.
Special = the thermal aging code only partially applies to this species. The species contains a large concentration of Niobium which alters the thermal aging calculation. Any results should be considered with suspicion with regard to thermal aging.

Author: Jim Berthold