View source for Displaying Tabular Polarization Rate Data in the CorrosionAnalyzer


== Polarization Rate Data Table ==

To display the polarization rate data in tabular you will need to customize the report. After the calculation has completed, click on the '''Report tab'''.
[[File:Polarization Rate Table 2016 updated.jpg]]

'''Figure 1 The rates calculation has finished.'''

== Reports Tab ==
You will see the default report for the rates of corrosion. The Polarization data is not included since the total amount of data is quite lengthy. To see this data, click on the '''Customize button'''.
[[File:Reports Tab 2016.jpg]]

'''Figure 2 The default report for the rates of corrosion.'''

== Report Contents ==
On the '''Report Contents tab''', check the '''Polarization Curves''' box. This will place the tabular polarization curve data into the report.

[[File:Report Contents 2016.jpg]]

'''Figure 3 The default customize options. Polarization curves is unchecked.'''


== Polarization Curves ==
In the Category window, select '''Polarization Curves'''. This will display a list of reactions in the window on the right. Select the curves you want by checking the appropriate boxes. By default, all boxes are checked.

[[File:Polarization Curves 2016.jpg]]

'''Figure 4 Selecting reactions'''


== Select Reactions ==
check the reaction that you would like to keep, and deselect the reactions you would not like in the simulation.

[[File:Add or Remove Reactions 2016.jpg]]

Figure 5 Select only a few reactions


== Final Results of Simulation ==
Click the '''OK''' button and you will be returned to the main report. Scroll down to find the polarization curve tabular data.

[[File:Final Report 2016.jpg]]

'''Figure 6 Scrolling down to find the tabular polarization curve data.'''

This was former Tip17.


[[Category:Tips]] [[Category:Corrosion]] [[Category:Former Tips]] [[Category: V9.2]]