OLI Flowsheet Applications
On this page we have collected some sample applications using OLI Flowsheet
- Autoclave Simulation for Hydro-metallurgy
- This is a simulation where a metal oxide (ZnO) is reacted with hydrochloric acid (HCl) in an ethanol solution. This example points out how to set up the initial charge and how to obtain results.
- OLI Flowsheet User Guide Example cases
- A collection of cases used to develop the user guide. Click the link to download the example
OLI Flowsheet File | Comments | Version | Validation (Stream Reports) |
---|---|---|---|
Ammonia Scrubber without reaction kinetics | A column without reaction kinetics to give the user a basic case with which to work. | 9.5.3, 10.0.2.1, |
10.0.2.1 |
Ammonia Scrubber with reaction kinetics | A column without with reaction kinetics parameters which can be adjusted. | 9.5.3, |
10.0.2.1 |
Emergency Chlorine Scrubber with 10 wt% NaOH | The emergency chlorine scrubber with 10% NaOH scrubbing liquor. Scaling Tendencies are low in this case | 9.5.3 | |
Emergency Chlorine Scrubber with 30 wt% NaOH | The emergency chlorine scrubber with 30% NaOH scrubbing liquor. Scaling Tendencies are high in this case | 9.5.3 | |
HF Sensitivity Analysis | A tutorial on how to set up and use a sensitivity analysis | 9.5.3 | |
Reactor - Gibbs type reactor | A example of using the Gibbs reactor | 9.6.2 | |
Reactor - User defined reaction kinetics (Spec type) | Reaction Kinetics using user defined (non-Arrehnius) type kinetics | 9.5.3 | |
Reactor - Using standard Arrehnius type reaction kinetics | Reaction Kinetics using Arrehnius type kinetics | 9.5.3 | |
Reactor - Stoichiometric | A stoichiometric reactor, also known as a CONV type reactor | 9.5.3 | |
Sour Gas Sweetening | A flowsheet simulating sour-gas sweetening | 9.5.3 | |
RO Membrane | Example of an RO membrane | 9.6.1 |