All pages
- ***ERROR: Unable to acquire ESP, CSP and toolkit license
- * Getting Started with OLI Engine: PIPESIM PVT File
- * ScaleChem Challenges
- ASAP variable list
- A short course on data entry
- About
- Acceptance Testing
- Activating the Pump Block
- Add a Stream
- Add a page
- Adding OLI calculated viscosity as a property set
- Adding a port number for Firewall
- Adjusting resolution of OLI studio in a 4K screen
- Administering the OLI License Manager
- Administering the OLI License Manager 3.1
- Advanced Techniques
- Alkalinity and OLI
- All Product Manuals
- Alliance Products
- Alliance Products including the OLI Developer Edition
- Alliance Software
- Alloy Manager
- Alloys
- An error occurred during the installation of assembly component
- Analyzers
- Application is not a valid Win32 application
- Aspen HYSYS
- Aspen PLUS
- Author: Andre Anderko
- Author: Peiming Wang
- Autoclave Simulation
- Autoclave Simulation for Hydro-metallurgy
- Benfield process
- COSIA Project
- CSTR vs Plug Flow Reactors
- CaCO3aq Ion Pair
- Calcium Carbonate Solubility
- Calcium Carbonate polymorphs
- Calculate and Display Heat Capacity
- Calculating Pitting Corrosion
- Calculation of pH in multiple solvents
- Categories: Company Information
- Change in Remote Access Server
- Checking for Updated Software
- Checking the OLI Engine version number inside UniSim Design
- Chemical Diagrams
- Chemistry Wizard
- Chemistry Wizard 9.2
- Chemistry Wizard Release Notes
- Chemistry Wizard Version 9.5
- Common Error Messages
- Common Error Messages in Aspen PLUS
- Common Error messages with the OLI Engine for Aspen HYSYS
- CompanyInformation
- Comparing ScaleChem v. StudioChem Calculations
- Comparing activity coefficients between different thermodynamic frameworks
- Component Search Tool
- Conversion of Assays and Pseudo-components to OLI Species
- Converting OLI Names to Aspen Names (The OLI-Aspen Cross Reference File)
- Converting from a Network Copy to an Individual Copy
- Converting mole fraction based equilibrium constants to molality based values
- Correlation between dates and API Versions
- Corrosion
- Corrosion Analyzer Video Tutorials
- Corrosion FAQ's
- Corrosion rate calculation FAQ's
- Corrosion rate calculation in pipe lines
- Corrosion rate units in OLI software
- Could not connect to license server 'ncacn ip tcp:...'
- Could not connect to the network hardlock server. Check your network settings and that the server is functioning.
- Creating a Log File during Installation
- Creating air headspace
- Creating and using Analyzer Plot Templates
- Current issues with OLI Flowsheet:ESP
- Current issues with OLI Flowsheet: ESP (Beta)
- Current thermophysical modeling issues
- Data regression
- Databank File Structure
- Databanks
- Databanks/Databases installed with the OLI Engine for Aspen Plus
- Database Release Notes
- Deprecated-Getting Started with OLI Engine: PIPESIM PVT File
- Deprecated-OLI Engine: PIPESIM PVT File
- Deprecated-OLI Engine: PIPESIM PVT Tips
- Deprecated-OLI Engine: PIPESIM Tutorials
- Deprecated-PVT files from OLI Studio
- Determine the version number of the OLI Studio Software
- Determine version number of the OLI Analyzers
- Development Software
- Development of the Hydronium Ion for MSE
- Dichloroacetic and trichloroacetic acid in both MSE and AQ frameworks
- Did OLI regress your data system
- Did OLI regress your data system? Using the Interaction Matix
- Diffusivity not available
- Disabling the contact surface solids may cause the calculation to fail.
- Displaying Tabular Polarization Rate Data in the CorrosionAnalyzer
- Does Ferric Hydroxide - Fe(OH)3 exist and why does OLI model it
- Does Ferric Hydroxide - Fe(OH)3 exist and why does OLI model it?
- Download
- Downloading OLI software
- Downloading and Installing
- Downloading and Installing the Network License Manager 3.4 with a physical key (USB)
- Downloading and Installing the Network License Manager with a physical key (USB)
- Downloads Tutorials
- Downloads and Installation
- DynaChem
- DynaChem FAQ
- ERROR SERVICE DEPENDENCY DELETED
- ESP
- ESP Classic
- ESP Column Information
- ESP Common Error Messages
- ESP Examples: Using Constrained Reaction Kinetics
- ESP Multistage Columns - Condenser Types
- ESP Original
- ESP Original FAQs
- ESP Original Tips
- ESP Original Tutorials
- ESP Size parameters
- EVS
- Electrical Conductivity and Ionic Radii
- Electrolytes and Activity Coefficients
- Elemental Sulfur Corrosion
- Enable the File Viewer Plug-In
- Enable user count visibility
- Enabling Features under Development
- Enabling MSE-SRK in the OLI Engine for Unisim Design
- Enabling OLI Trace
- Enabling custom calculation within survey
- Enabling end-users to see other users logged in
- Enabling optional calculations in OLI Flowsheet
- Engine STOP: blinit: ERROR: in file assignments
- Entering Bromley-Zemaitis interaction parameters
- Error: A chemistry model is required to use the OLI property option...
- Error: RPCNSBINDINGIMPORTNEXT FAILED
- Error: Security provider failed to initialize. Login Error: Hardlock Error (38): Term. Server / Citrix Winframe detected
- Error: Terminal Services are not supported with local protection key.
- Error Messages
- Error Terminal Services are not supported with local protection key
- Error Terminal Services are not supported with local protection key.
- Error codes from the manufacturer of the OLI security device
- Error in DBController
- Error in DBController:convertPrivate():
- Error initializing database Cause =" Terminating application.
- Errors during the installation
- Export of the OLI Software
- Exporting a DBS file from OLI Flowsheet
- Exporting a New Format Database for V9.6 and Earlier
- Exporting a Stream to ESP
- Exporting plot data from Analyzer Plots
- FAQ for Corrosion Analyzer EVS
- Failed to delete fridge token
- Features of the OLI License Manager
- File Management Errors
- File in Use
- Finding actual liquid flow in Unisim and OLI Pro with OLI Electrolytes
- Fixed, point and parent stream conditions - Definitions
- Flowsheet simulations
- Flue Gas Scrubbing
- Forrtl: severe(47): write to READONLY file, unit 22..
- Forrtl: severe (157): Program Exception - access violation
- Freezing Point Depression
- Frequently Asked Questions (FAQ) about MSE-SRK
- Frequently Asked Questions (FAQs)
- Frequently Asked Questions - FAQs
- Frequently Asked Questions about Scaling Inhibition
- GENDBS Failed (Error Code = 36).
- General Questions
- Generate a Content Listing of an OLI Databank
- Getting Started with Aspen PLUS OLI
- Getting Started with Aspen Plus(V.8.6) OLI
- Getting Started with Aspen Plus OLI
- Getting Started with OLI Engine: PIPESIM PVT File
- Getting Started with OLI Flowsheet: ESP
- Getting Started with the OLI Engine in Aspen Hysys (Video)
- Getting started with the OLI Engine for Unisim Design
- Getting the Event Log from the Network License Manager
- H3OION in MSE databank
- HASP ERROR (52): HASP Update incompatible with this hardware...
- HASP Error (18): Key with specified ID was not found.
- HASP Error (31): Feature not found
- HASP Error (43): HASP SL secure storage I/O error or USB request error
- HASP Error (502): Logging in twice to the same object.
- HASP Error (58): Invalid XML "recipient" parameter
- HASP Error (64): Cloned HASP SL secure storage detected
- HASP Error (65): Specified V2C update already installed in the LLM
- HASP error (48) vendor library cannot be found
- HF Chemistry and Modeling
- Hardlock/softkey drivers apparently fail to install properly
- Hardlock Restore
- Hardware requirements
- Heat Capacity
- High Temperature
- How does the Aspen PLUS OLI interface work?
- How is pH calculated when there is no H+ ion?
- How is pH calculated when there is no H ion
- How is pH calculated when there is no H ion?
- How much of a solid will form
- How much of a solid will form?
- How to "Set" the partial pressure of a gas
- How to "Set" the partial pressure of a gas?
- How to Enable/Disable Restart
- How to calculate fugacities when no vapor phase is present
- How to change units
- How to choose a subsystem
- How to copy and paste from OLI Studio to OLI Flowsheet: ESP
- How to create an Air headspace
- How to download the OLI Software
- How to enable file viewer plug in
- How to enable the optional calculations in OLI Studio
- How to enable the optional calculations in OLI Studio?
- How to export OLI/Analyzer reports to Excel
- How to install the OLI Software (Stand Alone)
- How to install the OLI Software (for individual USB hardlock key)
- How to install the OLI Software (for individual softkey)
- How to install the OLI Software with an individual softkey
- How to obtain equilibrium constants in OLI Studio
- How to use the OLI Remote License Manager
- Importing OLI Model in Aspen PLUS
- Importing OLI chemistry model in PRO/II
- Importing a stream into ESP
- Importing streams in ESP
- Individual PC copy
- Individual PC copy - hardware key
- Information collected with the Contact Support button
- Installation and security
- Installation issues
- Installing OLI Software on a Network
- Installing OLI in non-Standard Aspen Installations
- Installing a version locked individual copy
- Installing a version locked network server
- Installing an OLI Database
- Installing and Running OLI Engine for UniSim Design (Trial Copy)
- Installing and Running OLI Engine for UniSim Design (for individual softkey)
- Installing and Running OLI Engine for UniSim Design on the same machine as License Manager
- Installing and Running OLI Engine in UniSim Design On Network
- Installing and Running OLI Software on a different machine from License Manager
- Installing and Running OLI Software on same machine as License Manager
- Installing and Running the OLI License Manager 3.1 - Softkey Edition
- Installing and Running the OLI License Manager 3.x - Softkey Edition
- Installing and Running the OLI License Manager 4.x - Softkey Edition
- Installing and Running the OLI License Manager 5.x - Softkey Edition
- Installing and Running the OLI License manager 3.1- USB Hardware Key edition
- Installing and Running the OLI License manager 3.4- USB Hardware Key edition
- Installing and Running the OLI License manager 3.x- USB Hardware Key edition
- Installing and licensing OLI Engine in UniSim Design
- Installing and licensing OLI Engine in UniSim Design R440
- Installing and running the OLI Engine in UniSim Design (for individual USB hardlock key)
- Installing the OLI Engine for Aspen HYSYS
- Installing the OLI Engine for Aspen PLUS
- Installing the OLI Engine for Pro/II
- Installing the OLI Engine for UniSim
- Installing the OLI Software in Silent or Bootstrapped Modes
- Installing the hardlock drivers manually
- Installing the local (client) copy of a networked OLI Software
- Integrity Check Failure
- Interacting with OLI Technical Support
- Introduction
- Introduction to OLI Flowsheet
- Introduction to OLI Flowsheet - Part 1
- Introduction to the OLI Analyzers
- Ionic Strength
- Key Not Detected
- Known Conversion Issues (SC to SSC)
- License Manager
- License Manager issues
- License manager
- License manager / Security
- Licensing
- Licensing the OLI Engine in Alliance Software
- Linking the OLI Engine with an Alliance Partner
- List of Alloys for Corrosion Rates
- Load Data Base
- Load Data Base versions 9.6 and earlier
- Load Private Databases in ESP
- Loading a Database
- Locating Softkeys on your network
- Locating the OLI Temp files
- Login Error:Hardlock Error(15): Invalid Environment string.
- Login Error: Could not find a valid protection key with ID: LS...
- Login Error: Could not find a valid protection key with ID: PA...
- Login Error: Could not find a valid protection key with ID: PS...
- Login Error: HASP Error (51): Virtual machine detected
- Login Error: HASP Error (7): HASP Key not found
- Login Error: Hardlock Error(15): Invalid environment string.
- Login Error - HASP Error (41): The feature has expired
- Login Errors
- MBG
- MSE-SRK
- MSE Density Parameter Update
- MSE vs AQ
- Main Page
- Mass Transfer Columns
- Mass Transfer Towers
- Mass inflow lost error
- Mechanism of NH4HS corrosion
- Microsoft Excel - Engine not initialized
- Migrating to MSE
- Mixed Solvent Electrolyte ( MSE) model Regression Parameters
- Mixed Solvent Electrolytes
- Modeling SiO2 in MSE v. AQ frameworks
- Modeling of Aqueous Corrosion in presence of Hydrogen Peroxide
- Modeling the Chemistry of Carbon Dioxide - Rich Phases with Impurities
- Modifying the OLI Chemistry model for use in Aspen Plus
- My trial period has ended, now what
- My trial period has ended, now what?
- Named User FAQ
- Network
- Network (Client) copy
- Network License Manager
- Network copy - hardware key
- Network copy - software key
- Networks - hardware key
- OLI
- OLI Alliance Products
- OLI Alliance Software
- OLI Data Locator
- OLI ESP: Original
- OLI ESP Original Tips
- OLI ESP Original Tutorials
- OLI Electrolyte Property Package Initialization Fails
- OLI Engine
- OLI Engine: Developer Edition
- OLI Engine: PIPESIM PVT File
- OLI Engine: PIPESIM PVT Tips
- OLI Engine: PIPESIM Tutorials
- OLI Engine 9.2 in Aspen Plus User Guide
- OLI Engine 9.3
- OLI Engine Phase Identification
- OLI Engine Reference Manual
- OLI Engine for Aspen HYSYS 8.4 Getting Started Guide.pdf
- OLI Engine for Aspen Hysys Video
- OLI Engine in Aspen HYSYS
- OLI Engine in Aspen HYSYS : Getting Started Guide
- OLI Engine in Aspen HYSYS : Tips
- OLI Engine in Aspen HYSYS : Tutorials
- OLI Engine in Aspen PLUS
- OLI Engine in Aspen Plus
- OLI Engine in IDEAS
- OLI Engine in PRO/II
- OLI Engine in PROII
- OLI Engine in PetroSim
- OLI Engine in UniSim Design
- OLI Engine in gPROMS
- OLI Engine with RadFrac and FraChem